Adjustable Fuel Pressure Regulator Gauge Kit An6 Fitting End Universal

Best parts ever at a Grand Price

This is by far the best part I HAVE FOR MY [#36/1,000 B5BLUE SRT8 SUPER BEE 6.1 572WRHP ] EVER ,MANY THANKS
SIGN : EDWIN JAMES SUTPHIN
P,S I WILL TELL ALL MY HOT ROD FRIENDS
N I WILL BE BACK FOR MORE DEALESRead full review

Verified purchase:  Yes • Condition: new • Sold by: bettercloud

Torn Diaphragm

It is clear these regulators are not tested before being sold. After setting up all the lines needed and powering up the fuel pump, fuel began to leak out of both the pressure gauge and vacuum port. I decided to take it apart to investigate further. Turns out the diaphragm had a few holes allowing the fuel to leak into the vacuum port. Also, the surfaces for securing the diaphragm (held in place by pressure) were glossy smooth, which means over time the diaphragm would slip out on the joints. I roughed them up with sand paper but then notices the holes. I feel I could have done a better machining job on the inside of the regulator by hand as well. The fittings seem to have been working so I will be keeping them for the time being. As for the regulator itself? I'm just going to through it away and fork out the money for a better one.Read full review

Verified purchase:  Yes • Condition: new • Sold by: bettercloud

Odd

Great unit looks good, works well, #1 gauge reads pressure from fuel pump had to order a separate gauge and put in line after regulator which is fine now I know what the pump is doing and how much is going to fuel railRead full review

Verified purchase:  Yes • Condition: new • Sold by: bettercloud

Piece of junk!!!

For one the regulator has very loose tolerance on the threads. And after installing it would not regulate the pressure. After opening it up and looking at it the diaphragm is held closed between the top cap and the body of the regulator. And the diaphragm it self it very low quality and will tear very easily. A waste of money for sure.Read full review

Verified purchase:  Yes • Condition: new • Sold by: bettercloud

Warning!

This product had left over alluminum shavings in the threads that could potentially fall off and enter the fuel system and have devastating results to your engine. The pressure spring in this product is not correct which does not register the correct pressure after testing with air.Read full review

Verified purchase:  Yes • Condition: new • Sold by: bettercloud

Good quality and price.

For now I have only used the Fittings. The parts look good quality, the fittings work well. The Regulator is identical to the one of the recognized Brand.

Worth the money

While this product is probably made in China It looks to be as good as American made. The only warning I have is don't believe you can run pressures below 30psi, it can't without modification.

Verified purchase:  Yes • Condition: new • Sold by: bettercloud

no hole drilled retun port

return port has no hole in the port

Verified purchase:  Yes • Condition: new • Sold by: bettercloud

Good product

Verified purchase:  Yes • Condition: new • Sold by: bettercloud

Tapped holes are to loose ,had time getting them to seal.

Verified purchase:  Yes • Condition: new • Sold by: carautopartshome