- All
- New
- Pre-owned
5stars
36ratings4stars
9ratings3stars
4ratings2stars
4ratings1star
1rating
Would recommend90% agree
Good value89% agree
Good quality93% agree
44 reviews
Flexible
Mine rattle on the front wheel a bit, but that may relate to tyre size or the curved surface of my front forks. They are neat looking, non-invasive and easily removable when weather settles. They keep the rain off back and legs very well. If you've got a new bike you'd rather not spoil with mudguard screws in the fork eyelets (or don't have any eyelets at all) they are a great idea. I fastened mine also to the mudguard eyelet at base of down tube to give extra stability to rear guard.Read full review...
Verified purchase: Yes | Condition: new | Sold by: highonbikes
school boy errors
The only reason i recommend this product if is you can modify it yourself, you have to cut a square slot out with a hot knife underneath where the caliper goes on low clearance bikes and cut the end off where the bottom bracket is, on the front there is nothing to tie it to the caliper so sometimes it does rub on the bike tire but not often, i also had to cut the front end so it ended halfway through the caliper, didn't use the nose piece. The zip tie that goes around your frame should be rubber so it doesn't scratch your frame! Once it is on it's ok, but why do i have to redesign your product? simple schoolboy errors on your design.Read full review...
Verified purchase: Yes | Condition: new | Sold by: highonbikes
Fiddly but worth it
Works well to contain the road crud!
Theyre fiddly to fit (like most muddies), but once fitted they seem to work well (used once so far).
I was 'iffy' about the fixing method but it works so fair play!
I would ask they review the front part of the front wheel 'add on', a little bigger and more robust would be a helpful improvement as it still throws water in front your face - distracting when riding in the dark.Read full review...
Verified purchase: Yes | Condition: new | Sold by: highonbikes
Good quality mudguards
I had to replace my old mudguards and I wanted something that was easy to fit and didn’t impede the wheel movement, this mudguard was what I hoped for and good quality
Verified purchase: Yes | Condition: new | Sold by: timulc
Definitely Worth It
I would recommend this product without hesitation. The guards were easy to fit, they provide very good coverage and are lightweight. Adjustment takes some patience, so another pair of hands is advisable at this stage. I disagree with another reviewer who said that the rear wheel must be removed in order to join the rear derailleur guard extension to the main section. There is enough flexibility in the guards to enable you to do this in situ. Watch a few user videos before you start and follow the instructions exactly. They will work, if you have the required clearance above the wheels.Read full review...
Verified purchase: Yes | Condition: new | Sold by: highonbikes
Lightweight with easy to assemble instructions.
The product arrived quickly and it turned out to be easier to assemble and fix to my bike than I thought it would. Time will tell if it lasts, though it seems secure and fairly solid for it's light weight.Read full review...
Verified purchase: Yes | Condition: new | Sold by: highonbikes
Easy fit mudguards
The mudguards were easy to fit and didn’t require tools except a hacksaw to trim the length of the rear one. My bike has particularly narrow forks so I had to reduce the width of the front mudguard where it went through the forks. The adhesive Velcro is a nice secure fitting and makes for easy alignment of the guards.Read full review...
Verified purchase: Yes | Condition: new | Sold by: highonbikes
These are the best value mud guards out there
These are plastic mudguards that attach with a durable waterproof, plastic Velcro style attachment, they are easy to remove but won’t fall off during cycling or on a car mounted bike rack. This mounting system is genius, once the initial set up has been completed they can be removed and attached in seconds. My only gripe is that the front mudguard comes with a small guard that protrudes in front of the brakes, this is attached with foam tape that doesn’t stick well enough, you would need something else like the screw you get for the back to hold in place. However that isn’t a necessary part and I’m not bothered it has gone missing. They still work very well.
Read full review...
Verified purchase: Yes | Condition: new | Sold by: highonbikes
Crud Road Racer Mud Guards
Good quality kit; I was a little unsure of them but ”took a punt”. A little fiddly to fit, but nothing that a “dry-run” couldn’t help you with. The “Velcro” type fastening is surprisingly resilient but I would caution you to adhere to the instructions with regard to sticking them to the forks/frame: I utilised a heat gun on a medium setting to press them stuck, as the day I fitted them was a little chilly (10 deg C). Took my bike for a whizz up the road and was happy with their performance. I recommend these guards.Read full review...
Verified purchase: Yes | Condition: new | Sold by: highonbikes
Excellent product
It is easy to install, light and it keeps you dry and clean on rainy days.
Verified purchase: Yes | Condition: new | Sold by: highonbikes
Top Kit to Transform Your Winter Ride
Fitted these to my carbon Ribble R872. Back fender needed some fettling to get under the seat stay brace and brake calliper but once on and correctly positioned they are a godsend.
Be warned though - you may need to do some trimming so basic tools and a little DIY competence will be needed. I was worried about the clearance but I’m using 25mm tyres on Hed Belgium rims (I’m no Slim Jim) but they went on fine.
The velcro pads go on easily enough but you MUST use the alcohol wipes to clean your frame otherwise they won’t stick. Can’t recommend these highly enough.Read full review...
Verified purchase: Yes | Condition: new | Sold by: highonbikes