Condition:
4.84.8 out of 5 stars
437 product ratings
  • 5stars

    381ratings
  • 4stars

    47ratings
  • 3stars

    4ratings
  • 2stars

    3ratings
  • 1star

    2ratings

363 reviews

by Most favourable review

Carbine Shoulderstock

Immensely improves the accuracy of your shots! In the way it is designed and made you can take your shots with no movement at all. It allows you to put your shots pretty much through the same hole in the target time after time. At 50 feet you can pretty well place 20 shots in a 1/2 inch grouping with both the 1322 and the 1377. The 2240 not as close but much closer than free-handing it. The 14" barrel I am going to place on it replacing the 7 1/2" barrel it came with will bring it up to the standard of the others. The stocks are simple to put on! Being a machinist, don't tighten one screw all the way down and then the other. One hole pattern was slightly off on one gun and screwing it on to almost snug alternating screws and then snugging them down tight worked just fine. Quality is very good, just use good sense when pumping it. Hold the gun by the grip and not further back on the stock or you could have a problem you created! Read full review

Verified purchase:  YesCondition: newSold by: needfulthings_a...

by Most critical review

Excessive Length of Pull

I bought this plastic shoulder stock for my scoped Crosman American Classic .177 caliber pellet pistol equipped with the steel breech modification. The buttstock mounted easily on the pistol, but upon trying it I found that the length of pull was an incredibly long sixteen inches! I could not get a full field of view in the BugBuster scope as it was too far forward on the gun. By reversing the picatinny rail and moving the scope back as far as possible, I can just barely get a full field of view but it requires forcing my head forward uncomfortably. Also, having the picatinny rail mounted with its "wing" over the top of the loading port makes inserting a pellet more difficult.
If you will be using this stock with a scoped Crosman, I would suggest using a scope with a long enough body to allow a lot of rearward adjustment. Since this shoulder stock is pretty inexpensive, I may try cutting it in two and reducing the length of pull. This will require some means of reinforcing the joint, but I think I can do it.
Because of the excessively long length of pull, I cannot recommend this shoulder stock unless you are handy with making some modifications.
Read full review

Verified purchase:  YesCondition: newSold by: crosman

by

Awesome shoulder stock, really helpful f...

Awesome shoulder stock, really helpful for steadying a plinker like the 2240. High quality plastic, nice coat, seems durable and easy as sunday morning to install, just drop the screws and slide on. AlchemyAirWerks is quickly becoming my go-to shop for air rifle goods. Read full review

Verified purchase:  YesCondition: newSold by: needfulthings_a...

by

Improved my accuracy for offhand shooting and field use

Shoulder Stock is a welcome addition to my Crosman 1322 . Installation was quick and easy. Stock is light weight and feels sturdy. I do wish the length of pull were a bit greater. The pistol is quite capable from a solid rest, but trigger pull weight and a bit of creep hinder my offhand shooting. The shoulder stock overcomes those difficulties, so I much value it for field accuracy (wish I had initially bought the stock- pistol combo at the outset). Read full review

Verified purchase:  YesCondition: newSold by: hfl1999

by

Yep... Another 1399 carbine stock.

These are good stocks, the only non-aftermarket available. The length of pull is short and there can be a little play in them. Definitely not the first one I've bought, and probably not the last. They are easy to customize or great as a place saver or not half bad as is. Don't expect them to be AWESOME out of the box. They are a good starting point and serviceable as is.Read full review

Verified purchase:  YesCondition: newSold by: needfulthings_a...

by

Pistols are hard to hold, this makes it a steady carbine.

Might as well get the gun with the stock already installed, If buying new.
Stock fits loose to the gun itself you will have to shim that up.
The 1399 is a cheap gun, however in the end you may spend the most money on it.
I have mine all jazzed up metal bretch, new bolt even a longer barrel and a A/O Hammers scope
No Co2 needed, I love the pumpers, it will shoot with the best of them
Read full review

Verified purchase:  YesCondition: newSold by: needfulthings_a...

by

Great buy. It's an excellent accessory for the Crossman 2240 air pistol.

This stock is a well constructed, lightweight, molded, one piece unit that attaches effortlessly in just seconds, and adds significantly to my ability to hit POA consistently. It arrived in a short period of time, and it is reasonably priced.Read full review

Verified purchase:  YesCondition: newSold by: my_audio_empire

by

Crosman Carbine Stock

The stock is easy to attach and works very well. There are even a few out there air gun enthusiasts have modified. I would like to see some after market attachments like a shoulder pad or a cover with a storage pouch. Maybe make the Crosman Custom Shop versions of this stock available to the public.
Anyway, This is a very nice stock for the price.
Read full review

Verified purchase:  YesCondition: newSold by: crosman

by

Shoulder Stock 1377 Crosman Air Pistol/Carbine

I've wanted a Crosman 1377 Air Pistol for the past 30 years. At age 52 I purchased one and the shoulder stock to go with it. The quality is very good. Fitting it to you air pistol takes 2 minutes and a screw driver. Your accuracy will be enhanced depending on your skill. But this is a great way to practice marksmanship in the basement.Read full review

Verified purchase:  YesCondition: newSold by: airman72

by

Great addition

The gun is a little heavy. Adding the stock makes it easy to use and is very sturdy. The stock replaces the original hand grip and adds so much more to the gun.

Verified purchase:  YesCondition: newSold by: needfulthings_a...

by

Shoulder stock for 2240

I recieved my crosman shoulder stock for my 2240 and am very satisfied. It fits well , only too screws to install , puts my eye at just the right distance from the sights ( especially the peep sight ) makes for a very steady rifle like shooter plus I think it looks great ! Couldn't be happier . Bob , in Omaha .Read full review

Verified purchase:  YesCondition: newSold by: airman72

Why is this review inappropriate?

Displaying 1 - 11 of 363 reviews