5stars
29ratings4stars
3ratings3stars
0rating2stars
0rating1star
1rating
Would recommend100% agree
Good value100% agree
Good quality100% agree
30 reviews
A quality replacement part with all you need.
When I lost the trunnion off my original part I decided to bodge till I could get a replacement. Unfortunately this did not work because the valve failed during my attempt, spilling water all over the engine bay. This part came with everything I need to get my much loved classic back on the road. Plus nice new shiny parts always look good. ;-)Read full review...
Verified purchase: Yes | Condition: new | Sold by: ashleyhintonmgp...
1971 MGB Heater Drain Pipe
This pipe was to replace the non original arrangement on my 1971 MGB Roadster.
My rocker cover is an after market alloy version. To fit the pipe I had to drill out the bracket holes for the bolts to fit.
The pipe was a tight fit to the oil filler cap making it difficult to remove and replace. To cure this I filed the hole on one side by about 5 mm which solved the problem.
To be fair to MGHive, who are a well known and trusted supplier, if I had a standard rocker cover this part would have fitted without alteration.Read full review...
Verified purchase: Yes | Condition: new | Sold by: mgbhiveltd
MGB Bottom heater outlet pipework
Made according to original specification, and completed the reinstallation of the engine to the car body. Good value and suitable for the application
Verified purchase: Yes | Condition: new | Sold by: mgbhiveltd
A better valve IMHO
British made and a better finish/construction than the previous one I bought. I followed the fitting instructions from Kelvin (at Moss Motors) has great advice for fitting that makes complete sense. See below:
Blow through the new valve while operating the lever. When the valve seals, mark where the operating lever is located
.
When installing the valve, set the cable so that when the control is set for full closure, the arm only reaches the marked location. This will prevent the diaphragm from being crushed against the valve body, causing premature failure.
Simple when you know how.Read full review...
Verified purchase: Yes | Condition: new | Sold by: ashleyhintonmgp...
Heater Control Cable with solid wire inner (pull-push)
Arrived very promptly, looks to be good quality. Spent the afternoon modifying the wire and fitting to vehicle, when tested all seems good. Hopefully will last many years.
Verified purchase: Yes | Condition: new | Sold by: lotsofclassicbits
MGB Heater Control Valve
Replaced my gunged up old valve with this one and works perfectly from open to shut. Good value and quality.
Verified purchase: Yes | Condition: new | Sold by: mgbhiveltd
Good part
Delivered on time , as described footed well and works satisfactorily
Verified purchase: Yes | Condition: new | Sold by: mgbhiveltd
Well made heater water control valve
Well finished with no sharp edges which could damage rubber hoses or human fingers. Smooth action shut off
Verified purchase: Yes | Condition: new | Sold by: mgbhiveltd
Good replacement
Follow the installation tips found online and this valve will last for a very long time.
Verified purchase: Yes | Condition: new | Sold by: mgbhiveltd
MGB heater valve.
Well made valve, to original specs, and comes with gasket and trunion, which makes fitting easier.
Verified purchase: Yes | Condition: new | Sold by: ashleyhintonmgp...