5stars
23ratings4stars
8ratings3stars
6ratings2stars
0rating1star
2ratings
32 reviews
Great entry level Router Table!
New to the world of Routing and wanted a budget table to get me started. Build quality is nice and solid, very simple to set up you just need and 8mm spanner and a phillips screwdriver. Only minor thing I would say is my router has a really long power cord and the one that comes out of the table is really short but that is just a small issue.Read full review
Verified purchase: Yes • Condition: new • Sold by: laptronix-uk
OK for the Money but tricky to assemble and align
Because of the way the side pieces are bolted it is really tricky to level the top surface.
Was not helped by a slight misalignment on one leg, which would not bolt on any corner. Needed a lot of effort and very careful bolt tightening. The other three were fine.
But I would say it is probably value for money.
Just as well that I know how to put things together and how to level.Read full review
Verified purchase: Yes • Condition: new • Sold by: laptronix-uk
Pretty good
Assembly was simple and did not take too long. Light and movable to transport from storage to bench but as my Router base is spring loaded needed to be clamped down to set the cutter height. The safety switch is very good and the only real problem I had was trying to set the fence as I needed to hold the fence and tighten up the screws while holding a spanner underneath I temporarily negated this by fitting the screws upside down. Really needs to be designed better in this area. Considering the cost and quality of this cheap table I am very happy. Would recommend as a first bench 4/5Read full review
Verified purchase: Yes • Condition: new • Sold by: laptronix-uk
Good value for a simple table.
I'm still working it all out but the instructions were quite clear for putting it together and the quality seems fine for the price.
I can't say much more until I start to use it. The only possible downside or limitation is that the fence doesn't move too far away from the bit meaning I can only use it within a couple of inches from the edge of the wood unless there is a way to do it that I haven't worked out yet.Read full review
Verified purchase: Yes • Condition: new • Sold by: laptronix-uk
Brilliant
Was reluctant to buy as had no reviews other similar tables had some negative points ,needn't have worried this routers bench is great easy to put together, instructions in clear English, with none of the negative points of other manufacturers, cannot think of anything negative about it,even delivered early, would recommend it .Read full review
Verified purchase: Yes • Condition: new • Sold by: laptronix-uk
Do not even consider buying! Had to be returned.
It is of poor quality. The table itself is not a level surface. The fence is not straight and the mounting system for attaching the router is iffy. This is obviously a mass produced product with no regards to tolerances. It is a waste of money even for the hobbyist or casual user. The table is cast with a huge high spot in the centre of around 3-4mm. The fence leads inwards to the cutting bit on both sides making an even groove impossible. Any cuts will be deeper at start and finish than in the centre. DO NOT BUY THIS PRODUCT.Read full review
Verified purchase: Yes • Condition: new • Sold by: laptronix-uk
ToolTronix Router Table
This is a reasonable router table.
Pro's:
Sturdy, reasonably light weight
Easy to assemble (Phillips screwdriver and 8mm spanner required)
The bed seems flat enough
Supplied with safety NVR switch
Con's
It could do with some more washers (I will be adding these)
Centering the router in the table is guesswork - I made packing pieces but centering cones are available
Limited to cutters less than 22mm dia
I find that the NVR switch does not always stay on when starting - needs holding for a few secondsRead full review
Verified purchase: Yes • Condition: new • Sold by: laptronix-uk
Great router table all you will need.
A first class peice of equipment, well made and very sturdy, it was easy to asemble and it worked fine. I am very pleased with it and it should last me a good few years.
Verified purchase: Yes • Condition: new • Sold by: laptronix-uk
Good machine for DIY use
Has to be assembled but is easy enough if you take your time. Even mounting the router was easy.
Some of the edges can be sharp especially the bottom of the feet, so I mounted mine on a board which also firms the legs up.Read full review
Verified purchase: Yes • Condition: new • Sold by: laptronix-uk
Introduction to table routing
Very much an entry level piece of kit. OK for establishing the principles of table routing but finding it difficult doing accurate, fine work. There was an issue with a part of there originally supplied table but the supplier was excellent in supplying a replacement part. Excellent serviceRead full review
Verified purchase: Yes • Condition: new • Sold by: laptronix-uk